PARAG Fans provide almost a 15 to 40 % Electrical Power saving over the conventional GRP Fans. The payback period for replacement is around six to eight months.
PARAG fans range from 600 mm to 12,000 mm OR 2 feet to 36 feet in diameter. These fans are ideally suited for application in Power Plants, Textile Industries, Cement Industries, Petrochemical Industries, Mines, Tea Industries, Refineries etc. in installations such as: Cooling Towers, Air Cooled Condensers, Industrial Ventilation and Exhaust, Humidifiers, Mine Ventilation, Withering Troughs and HVAC.

The distinctive advantages of PARAG FRP Fans are:
1. INCREASED EFFICIENCY: The FRP blades have a laminar flow aerodynamic profile with a tapered and twisted aerofoil section that increases the efficiency of the fan.

2. LOWER OPERATING COSTS: Our fans need less power to move the same volume of air through a system as compared to conventional metallic bladed fans and some other FRP fans.

3. STRENGTH: Single piece construction even for large blades imparts more strength.

4. UNIQUE MOLD: All sizes of blades have their separate mold with the unique profile.

5. LIGHT WEIGHT: Results in ease of handling with reduced downtime and longer life for the associated drive bearings. If gearboxes are installed, overall wear and tear is reduced due to the lighter weight of the fan.

6. NON-CORROSIVE: All ‘materials of construction’ are carefully chosen to combat the corrosive environment of the application. Each blade has built-in leading edge protection to prevent erosion due to the impact of water droplets.

7. DURABILITY: A higher strength to weight ratio as compared to conventional metallic bladed fans, ensures less wear and tear on all drive components.

Leading Manufacturers of Energy Efficient Axial Flow FRP Fans.